CYLINDER HEADS CHEVY BB 360cc CNC PORTED

*****100%NEW***** *****100%NEW*****

Procomp Motorsport's 360cc BIG BLOCK CHEVY, BARE, Aluminum Cylinder Heads

**PORTED, BARE, 3 ANGLE CUT**

Aircraft Grade 356A T-6 Aluminum Alloy

115cc Combustion Chamber, 360cc Intake Runners

Fits All OEM Bolt Pattern Manifolds, Intake Head Bolt Standard OEM Length

8 Bolt Exhaust Flange, Square Port Exhaust, 15/24 Degree Valve Angle

Manganese Bronze Valve Guides

3 Angle Cut Stellite Valve Seats

Takes Felpro 1275 bigger gasket set, Felpro 1047 Head Gasket

65 ft.lb Torque Specs, Suggested Roller Cam Base of 1.130"

8005 Single Spring w/dampner OD 1.54", Valve Springs Rated at .750" Max Lift,

Spring Pressure; Intake, 1.805" @ 165lbs, Exhaust 1.770"@ 180lbs

Coil Bind @ 750lbs. , Intake Head Bolt Standard OEM Length

Installed Spring Height-Intake 1.82/Exhaust 1.87, Uses Motorcraft AGF-22 Plugs

Installed spring height should be checked with your camshaft specs of your application.

Long 7/16" Rocker Stud Kits Available @$49.95, Guide Plate Kits $49.95,

Head Stud Kits Available @$79.95

Flow Test Data @28" CFM Water Intake (according to manufacturer)

LIFT 100 200 300 400 500 600 700 800 900
INTAKE 73.3 140.8 212.3 279.9 331.3 364.8 389.4 404.3 407.0
EXHAUST 59.8 121.5 165.6 205.5 237.9 265.5 288.8 307.4 320.6

This item is NEW

Trades NOT ACCEPTED

Payment options:

NO PERSONAL CHECKS!

Item Location: FORT LAUDERDALE, FL Get Directions

Instructions for buyer:  Buyer will pay all shipping/handling charges to their final delivery destination.

This ad expires in 4 days.