588 Cu. In. Ford -- 460 Style

Questions & Answers about this ad

Question:

I'M LOOKING TO WORK A TRADE WITH YOU. I HAVE A LOW 9 SEC 331 A4 BLOCK WITH NITROUS AND I'M READY TO GO FASTER, CAN WE WORK OUT A DEAL. CLARK

Answer:

thanks for your inquiry, but I just want to sell the motor with no trades. I really would not have any use for it as we are currently running a blown alcohol hemi. Please note that I am flexible on price. I have close to 35K invested in this motor. Make me a reasonable offer and it is yours. Bill L On [2008-03-25 16:00:12] cobra351 wrote: > I'M LOOKING TO WORK A TRADE WITH YOU. I HAVE A LOW 9 SEC 331 A4 BLOCK WITH NITROUS AND I'M READY TO GO FASTER, CAN WE WORK OUT A DEAL. > > CLARK

Questions & Answers about this ad

Question:

What kind of compression it running? What are the cam specs?

Answer:

Compression is 13:1 (per my engine builder and we run 114 fuel. Cam lift I think is about .820. I could call my engine builder and see if he still has the spec's. This motor made 1025hp. and 854 lbs. torque. I shifted the motor @ 6700. Any questions, please feel free to contact me. Motor is Fresh and has only 15 passes Thanks Bill On [2008-03-31 22:52:13] shahrum wrote: > What kind of compression it running? What are the cam specs?

Questions & Answers about this ad

Question:

What kind of compression it running? What are the cam specs?

Answer:

I have found the Cam Card this morning at my engine builder. If you would like, I could Fax the specs to you. If you like call me @ 630-904-7755 and we can discuss this. Bill L On [2008-03-31 22:52:13] shahrum wrote: > What kind of compression it running? What are the cam specs?

Questions & Answers about this ad

Question:

Was this in a blue cobra. Do you still have the engine ?

Answer:

YES, THIS WAS IN A BLUE COBRA AND I STILL HAVE THE ENGINE. AS A MATTER OF FACT, THIS IS THE ENGINE FROM THE COBRA. ENGINE HAS ONLY 15 PASSES ON IT SINCE IT WAS FRESHENED. IF YOU LIKE, YOU CAN GIVE ME A CALL AT 630-904-7755 BILL L On [2008-04-04 23:28:44] LarryTurner1 wrote: > Was this in a blue cobra. Do you still have the engine ?

Questions & Answers about this ad

Question:

I SAW YOU ARE LOOKING TO DO A TRADE DEAL BUT READ THIS. I HAVE AN A4 BLOCK 331 SETUP FOR NITROUS WITH ALL THE GOODIES IN IT. THE HEADS ARE AFR FULLY PORTED. I RAN THIS MOTOR ABOUT 6 TIMES LAST YEAR INCLUDING FUNFORD 10.60 CLASS THE MOTOR WILL RUN IN THE 9'S WITH A SMALL SHOT OF NOS. LOOKING TO TRADE PLUS 2K CASH TO YOU. I HAVE ABOUT 12K TOTAL IN THE BUILD AND LOOKING TO RUN FASTER THIS YEAR.

Answer:

thanks for your reply, however, there must be some confusion as I don't want to do a trade. However, I am flexible on the price. Any questions, please feel free to contact me. Bill L On [2008-04-07 12:10:25] cobra351 wrote: > I SAW YOU ARE LOOKING TO DO A TRADE DEAL BUT READ THIS. I HAVE AN A4 BLOCK 331 SETUP FOR NITROUS WITH ALL THE GOODIES IN IT. THE HEADS ARE AFR FULLY PORTED. I RAN THIS MOTOR ABOUT 6 TIMES LAST YEAR INCLUDING FUNFORD 10.60 CLASS THE MOTOR WILL RUN IN THE 9'S WITH A SMALL SHOT OF NOS. LOOKING TO TRADE PLUS 2K CASH TO YOU. I HAVE ABOUT 12K TOTAL IN THE BUILD AND LOOKING TO RUN FASTER THIS YEAR.

Questions & Answers about this ad

Question:

Motor sounds good, wondering what brand, type and size valves.(s.steel, titanium, 2.45?) What are the cam spec's total #of passes on crank, block,valve train, rods not what is on freshen up. any extra pieces, bottom dollar, credit card?cashier check? Email at jim-burrell@hotmail.com

Answer:

Jim: Motor has about 80 passes on it. Motor was freshened a couple of years ago but only has 15 passes on it since freshended. (Crank, pistons, & valves are original) Had new rings, bearings and valves done and replaced roller lifters at that time. Motor has T&D Rocker shaft assembly, 2.450 (Titanium ?) with 1.900 exhaust. All head work was done by Mandolini and these are "C" heads. Motor is of Ford configuration and all you have to do is to put oil in it. This motor was never beat on as I left the starting line @ 3600 and shifted at 6700. Motor is very consistent. I do have the cam specs that I could fax over to you. Give me a call and we can further discuss the price and any other questions that you may have. I am open to a reasonable offer. Call me at 630-904-7755 Bill L Reason for selling the motor is that we got into Blown Alcohol Hemi pro mod and have a whole car. This m On [2008-04-25 12:00:30] jimburrell wrote: > Motor sounds good, wondering what brand, > type and size valves.(s.steel, titanium, 2.45?) What are the cam spec's > total #of passes on crank, block,valve train, rods not what is on freshen up. any extra pieces, bottom dollar, credit card?cashier check? > > Email at jim-burrell@hotmail.com >

Questions & Answers about this ad

Question:

G'day mate, is the motor still avaliable, would you sell to buyer from Australia, have an Uncle in Rochester, NY to ship to! Please supply your final & last price?

Answer:

I would be more than glad to ship to New York but shipping costs would be yours. As for the price I just reduced it from $14,900 to 13,900 about two weeks ago. I would like to get $13,900 but make me a reasonable offer as I had just lowered the price seeing as I have over $ 35,000.00 in the motor. Please advise or you can call me direct as 630-904-7755 and we can further discuss this. Thank you for your inquiry Bill L On [2008-05-10 20:09:22] trag0351 wrote: > G'day mate, is the motor still avaliable, would you sell to buyer from Australia, have an Uncle in Rochester, NY to ship to! Please supply your final & last price?

Questions & Answers about this ad

Question:

G'day mate, is the motor still avaliable, would you sell to buyer from Australia, have an Uncle in Rochester, NY to ship to! Please supply your final & last price?

Answer:

Are you still interested in the 588 motor? If so, I am willing to take a reasonable offer rather than stay at the $13,900 price as per my last e-mail to you. Please advise Bill On [2008-05-10 20:09:22] trag0351 wrote: > G'day mate, is the motor still avaliable, would you sell to buyer from Australia, have an Uncle in Rochester, NY to ship to! Please supply your final & last price?

Questions & Answers about this ad

Question:

G'day mate, is the motor still avaliable, would you sell to buyer from Australia, have an Uncle in Rochester, NY to ship to! Please supply your final & last price?

Answer:

Are you still interested in the 588 motor? Make me a reasonable offer and we can put this deal together. Please advise Bill On [2008-05-10 20:09:22] trag0351 wrote: > G'day mate, is the motor still avaliable, would you sell to buyer from Australia, have an Uncle in Rochester, NY to ship to! Please supply your final & last price?

Questions & Answers about this ad

Question:

Bill, im intrested, just waiting back on quote to ship back to Australia, are you on paypal? On [2008-05-14 10:18:44] BL1966 wrote: > > > Are you still interested in the 588 motor? > > Make me a reasonable offer and we can put this deal together. > > Please advise > > Bill > > > On [2008-05-10 20:09:22] trag0351 wrote: > > G'day mate, is the motor still avaliable, would you sell to buyer from Australia, have an Uncle in Rochester, NY to ship to! Please supply your final & last price? >

Answer:

Thanks for your prompt response and I will take pay pal. Look forward to hearing from you soon. Thanks Bill L On [2008-05-14 14:25:55] trag0351 wrote: > Bill, im intrested, just waiting back on quote to ship back to Australia, are you on paypal? > > On [2008-05-14 10:18:44] BL1966 wrote: > > > > > > Are you still interested in the 588 motor? > > > > Make me a reasonable offer and we can put this deal together. > > > > Please advise > > > > Bill > > > > > > On [2008-05-10 20:09:22] trag0351 wrote: > > > G'day mate, is the motor still avaliable, would you sell to buyer from Australia, have an Uncle in Rochester, NY to ship to! Please supply your final & last price? > > >

Questions & Answers about this ad

Question:

I HAVE A 331 A4BLOCK SETUP FOR NOS. MY MOTOR WAS BUILT TWO YEARS AGO BUT I DID NOT RUN IT THE FIRST YEAR DUE TO I LEFT FOR IRAQ. ABOUT 6 TEST RUNS I FUN FORD. I'M LOOKING TO MOVE UP IN POWER THIS YEAR.MY MOTOR RUNS 9.90's ON A 175SHOT. WOULD LIKE TO TRADE PLUS 2K CASH FOR YOURS. IF YOU WANT TO SEE IT RUN I'LL BE ON PINKS ALLOUT IN JUNE IN NORWALK OH. COME OUT LETS WORK A DEAL.

Answer:

Sorry, but I no not want to trade but thanks for the offer and serving our country. Bill L On [2008-05-20 19:11:13] cobra351 wrote: > I HAVE A 331 A4BLOCK SETUP FOR NOS. MY MOTOR WAS BUILT TWO YEARS AGO BUT I DID NOT RUN IT THE FIRST YEAR DUE TO I LEFT FOR IRAQ. ABOUT 6 TEST RUNS I FUN FORD. I'M LOOKING TO MOVE UP IN POWER THIS YEAR.MY MOTOR RUNS 9.90's ON A 175SHOT. WOULD LIKE TO TRADE PLUS 2K CASH FOR YOURS. IF YOU WANT TO SEE IT RUN I'LL BE ON PINKS ALLOUT IN JUNE IN NORWALK OH. COME OUT LETS WORK A DEAL.

Questions & Answers about this ad

Question:

what car was this in do you have headers thanks

Answer:

The motor was in a 1966 Ford AC Cobra Replica. I still have the headers and you are welcome to them. The collector and pipes could probably be adapted to your car. Any other questions give me a call at 630-904-7755. Thanks for your inquiry and have a great weekend. Bill L On [2008-05-23 22:17:19] alleycorral wrote: > what car was this in do you have headers thanks